Bulldozer Seat in San Jose - attempting to find OEM or aftermarket Loader Components which can be delivered super quick. We currently have easy access to scores of manufacturers across the world and are able to supply your personal new and used equipment needs.
Propane fueled forklifts are frequently utilized in warehouses. The forklift is designed with the propane tank mounted at the back of the driver. The tanks, that look a lot like beer kegs, need to be replaced periodically because they have a limited lifespan. Drivers of forklifts should use care when handling propane tanks. Compressed gases are hazardous, specially since the gas is flammable. Always use care when removing and replacing propane tank to avoid being injured.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This procedure burns off the gas inside the transfer hose which connects the tank and the engine. Before taking the second steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is very vital for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 You could check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to froth around the value. If this occurs, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the valve area, and after that do the leak checking process again. Persistent leaks mean that both the connecting hose and nut should be replaced. However, if replacing the nut and hose still does not stop the leak, the tank will need to be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. After that you could start the forklift and continue operating.
Since 2011, the Linden Comansa company has offered its customers the LC 1600 series tower cranes. This series includes the models: 16 LC 260, 16 LC 220 and 16 LC 185. These units are available in various kinds of maximum load. The LC 1600 series design allows Comansa to keep their fundamental premises, like for example easiness of transport and assembly and modularity.
This particular series has a load capacity of 8 to 12 tons. The LC1100 cranes provide a 5 to 8 ton load capacity, while the bigger LC2100 model supports loads from 12 to 48 tons. In addition, the LC1600 family brings together the benefits of both series that shares a range of factors.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is currently in all the tower cranes made by the company. This series incorporates many innovations in the particular machine.
There are 4 Flat-Top cranes within the LC 2100 series. These cranes have the denominations of 21 LC 400, 21 LC 290 and the 21 LC 550. The newest addition to the series is the 21 LC 750. The 21 LC 750 crane is the biggest in the series. It is equipped with eighty meters of jib length and 7 tons of jib-end load. This tower crane provides a maximum load of 48 tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1100 and the 30 LC 1400. These two models are also in 3 different versions with different load capacities. The ranges of load capacities are 70,550; one hundred five thousand eight hundred twenty and one hundred forty one thousand ninety lbs. or thirty two, 48 and 64 tons. The largest Flat-Top tower cranes have been designed mostly for heavy industry, mining and construction applications and public works.
The Linden Comansa company has manufactured large capacity cranes for numerous years. Ever since designing this series, the overall production and delivery timeframes are a lot shorter now. The company has maintained highly competitive pricing for their equipment.
