Doosan Excavator Swing Motor in San Jose - With one of the largest choices on the market, you can be certain to locate the parts you absolutely need to get you up and running very fast. Our expert San Jose staff of parts specialists are standing by to help you source the components you're after.
The forklift is a very versatile equipment, with a wide assortment of accessories able to be fitted onto the machinery. These accessories could increase the lift truck's capabilities and expand the jobs they are often able to finish. Some of the main different forklift accessories and parts are described below.
Fork Extensions
The fork extensions are the forks on the forklift. These forks could can be changed completely, or different parts can be added to them so the truck can raise various types of loads such as rollers, telescopic loads, baskets, amongst others.
Forklift Seals and Bearings
The bearings and seals are particular forklift components that allow the inner workings of the machine to operate in an optimum and efficient manner. Bearings enable two moving components of the equipment to work together smoothly, without any friction. If not properly fitted, seals and bearings can occasionally wear down or even break and these components may need to be replaced occasionally. If a bearing is the proper kind of bearing used for the machine and it is fitted correctly, this forklift part could easily outlive the life expectancy of the entire apparatus.
Cabs
The cab component of the forklift truck is the section where the operator sits and controls the entire machinery. Depending on the particular unit, the cab could be open or it may have a roof. On a work place, this forklift component typically has a roof to reduce the risk of falling materials and comply with safety reasons.
Brake Forklift Parts
Forklifts trucks have brakes that are required to be frequently tested in order to ensure they are in good working condition. usually, these parts would have to be replaced because of damage or extended wear.
Tires and Wheels
The forklifts wheels and tires are the components most normally damaged. Problems occur because of slashes from rough and uneven floor boards and punctures from sharp objects on the floor.
The forklifts are all produced utilizing Nissan industrial engines. Greater torque and better horsepower satisfy various recycling, warehouse and manufacturing operations as well as other outdoor/indoor situations.
The forklifts manufactured by Nissan are offered in liquid propane or LP, or Dual Fuel with LP/ gas. These machines also come with a fuel management system that offers great fuel efficiency and reduced HC, CO and NOx exhaust emissions. Each compact unit comes standard with the comprehensive engine protection system. This particular system is in place in order to warn operators in case of too much heat or a severe drop in oil pressure. This system provides extended drive train life and engine life for your lift truck investment.
Operator Comfort and Control
There is a lot of foot, head and leg room built into every operator compartment and is versatile enough to deal with different sized drivers. The forklift offers a standard full suspension seat that has soft touch arm pads and hip resistant to offer maximum operator comfort and enhanced safety. The low profile design of the model offers plenty of head clearance. There is also a front to back travel adjustment to allow a customized fit in order to accommodate basically any operator height.
The K-series engine made by Nissan offers the same block design and bottom by-pass cooling system which is standard on the predecessor H-series. These new and improved engines are specially designed and tested for industrial applications so as to give all of the torque and power, in the low rpm range, to meet the requirements of the operation.
The K21engine includes a transmission/engine warning system and protection that is an additional safeguard which is added for your investment. It helps by reducing the speed in the event of low oil pressure or excessive heat generation.
